Salta al contenuto principale della pagina


CODE 86745
  • 6 cfu during the 1st year of 10800 INGEGNERIA MECCANICA - ENERGIA E PRODUZIONE (L-9) - SAVONA
    LANGUAGE Italian
  • SEMESTER 2° Semester
    MODULES This unit is a module of:



    The course provides the basic knowledge, according to ISO standards, for the correct interpretation and understanding of technical drawings and for drafting, using a CAD software, mechanical components with geometry description and all further information (tolerances, processes, materials, etc.) necessary for their implementation (tolerances, processes, materials, etc.).


    The lectures will allow the student to learn the general aspects and framework of the design sector with particular regard to the representation methodologies of real objects through orthogonal projections according to the European ISO method with the use of sections and the indication of quotas, dimensional tolerances, geometric and microgeometric tolerances.

    In addition, some topics of particular interest to the industrial engineer will be examined, such as threaded connections, removable connections and permanent connections.

    The class exercises will aim to explain the commands for the use of CAD software for the realisation of A4 tables in which a mechanical piece is represented according to European orthogonal projections. In the classroom are assigned exercises that are carried out by the students under the guidance and supervision of the teacher. 

    In order to facilitate the learning of the methods of representation of 2D tables to the students, grouped in pairs, themes are assigned that they develop independently. The idea is to take advantage of learn by doing and learn by trial and error. The teacher guides and assists the students without interfering with their reasoning and then asks the students to show the result to the whole class. The teacher then highlights and explains the errors and corrects them in real time.

    At the end of the course, thanks to lectures, exercises and personal study. the student will be able to know and apply the method of orthogonal projections for the representation of objects, will be able to quote in an appropriate and unambiguous way and designate the dimensional, geometric and microgeometric tolerances with ISO symbols. He/she will have acquired knowledge of the terminology and basic rules for industrial technical design and will be able to identify tolerance positions and intervals suitable for the most frequent shaft-hole couplings. He/she will have learned the logic of tolerances and will be able to interpret its meaning and to indicate it according to ISO standards. He/she will have acquired knowledge and mastery of the commands for the creation of graphic primitives, their manipulation and modification and for the designation of dimensions, tolerances and machining in the CAD environment through which the two-dimensional A4 tables will be created.


    Lectures and exercises using the CAD in computer classroom.


    EU Machinery Directive and Italian D.Lgs. 81/2008.

    Outlook on Design for Assembly and Manufacturing.

    Standardisation: National and International standards. Drawings types. Representation of the shape and size of a mechanical part: the graphic model. Orthogonal projections, sections, dimensioning and relative rules. Overview on other types of projections (axonometric, trimetric, slanted). Tolerances: dimensional, geometrical, surface finishing tolerances. Matings: base-shaft, base-hole systems. Maximum material condition. Envelope principle. Threads. Classes of bolts and nuts. Bearings: types, mounting systems, simplified representation. Gaskets. Devices for dismountable mechanical joining (keys, tapered keys, pins, transversal pins, set-screws, “Seeger” rings, toothed matings) and for fixed assembly (riveting, welding, graving). Guidelines for the shape of mechanical parts in relation to the process used to build them.

    Practice: practice will be done in computer classroom by using the CAD software Microstation.


    • R. Razzoli “Dispense del corso”, disponibili sul sito "Aulaweb" della Facoltà di Ingegneria di Genova.
    • E. Chirone, S. Tornincasa “Disegno tecnico industriale”, vol. 1 e 2, Ed. Il Capitello, Torino, 2001.


    Exam Board

    ROBERTO RAZZOLI (President)



    LUCIA CASSETTARI (President Substitute)


    Class schedule

    All class schedules are posted on the EasyAcademy portal.



    The assessment of learning is done by aggregating the results of the test on computer graphics (drafting of a mechanical part) and oral examination.

    The exam is divided into 2 tests:

    A graphical computer test, which involves the execution of a constructive design using the 2D CAD MICROSTATION v8i. The graphic test takes place in the computer room (duration of the test: 2 hours) and the result of the test must be ≥ 18/30.
    An oral test, which includes an assessment of the theoretical knowledge indicated in the course program.
    N.B. The written test, if sufficient, is valid for the whole solar year. The oral exam can be taken in any official appeal.

    Application for the graphic test

    It is mandatory to book using the online mode (from the University portal services to students), AT LEAST 5 DAYS BEFORE the start of the test.
    Given the limited capacity of the computer lab, one group is planned in the morning and a second one in the afternoon. These groups foresee a max. of 35 people.
    If the total number exceeds 70, a further date will be set.
    Within the assigned term, the drawing must be printed and the file copied to the Classroom - Delivery Unit folder.
    It is possible to consult books and / or manuals.
    The results will be announced on Aulaweb.
    The oral examination if not passed (or rejected) does not cancel the written test. The positive results obtained in the graphic tests are valid for the whole exam session (calendar year).
    The final grade is the average of the oral test and written test score.

    Further information:

    Files containing the sheet squaring for A4 and A3 formats and the Microstation seed file settings are available on Aulaweb.
    Upon delivery of the written test, the evaluation of any previous test is lost.

    Registration for the oral test

    After the publication of the results of the written test it is possible to register for the oral exam, using the web-based booking tool. Each student enrolled in the forum will receive an email alert, with the day and time of the oral test.


    The examination procedures, its preparation and the degree of deepining of each topic will be illustrated during the lessons and reported on Aulaweb.

    The written examination consists in the realization of a 2D table with dimensions and tolerances of a mechanical part of which a three-dimensional representation is provided. The student must be able to represent the proposed object unambiguously, maintaining its proportions, according to the European method of orthogonal projections; must provide the minimum number of views necessary to guarantee the workable realization of the piece; he or she will have to arrange the dimensions in sufficient and not redundant manner and to indicate the tolerances according to the required specifications in the examination text. He or she must be able to use the appropriate styles and line weights; must be able to designate a coupling in the hole-basis or shaft-basis system.

    The oral examination will focus on the topics covered during the lectures and have the purpose of assessing not only if the student has reached an adequate level of knowledge, but also if he or she has acquired the ability to deal with logical problems that will be posed during the exam.

    The student will be asked to illustrate theories and solve problems: in relation to these it will be evaluated the clarity of exposition, the appropriateness of the used  terminology and the methodological approach oriented to manufacturability, interpreting and formulating prescriptions and principles related to the description of parts in a unique, unambiguous and not redundant way.

    Exam schedule

    Date Time Location Type Notes
    09/02/2021 09:00 SAVONA Scritto
    11/06/2021 09:00 SAVONA Scritto
    30/06/2021 09:00 SAVONA Scritto
    21/07/2021 09:00 SAVONA Scritto
    08/09/2021 09:00 SAVONA Scritto


    Pre-requisites :

    Fundamentals on geometry and on the Windows operating system